Sensor Features - Monogram ZWL1126SJSS Manuel De L'utilisateur

Four à micro‑ondes à tiroir
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Sensor features.

The Sensor Features detect the increasing humidity
released during cooking. The oven automatically adjusts
the cooking time to various types and amounts of food.
Do not use the Sensor Features twice in succession on the
same food portion—it may result in severely overcooked
or burnt food. Be sure to let the oven cool down for 5-10
minutes before starting the next sensor cook.
If food is undercooked after the countdown, use time
cooking for additional cooking time.
• The proper containers and covers are essential for best
sensor cooking.
• Always use microwave-safe containers and cover
them with lids or vented plastic wrap. Never use
tight-sealing plastic covers— they can prevent steam
from escaping and cause food to overcook.
• Be sure the outside of the cooking container and the
inside of the drawer microwave are dry before placing
food in the oven. Beads of moisture turning into steam can
mislead the sensor.
Dry off dishes so they don't
mislead the sensor.
Covered
Vented
Operating Instructions
Using Sensor Settings:
• After the Drawer Microwave is plugged in, wait 2 minutes
before using any sensor setting.
• Be sure the exterior of the cooking container and the
interior of the Drawer Microwave are dry. Wipe off any
moisture with a dry cloth or paper towel.
• The sensor works with foods at normal storage
temperature. For example, popcorn would be at room
temperature.
• Any sensor selection can be programmed with More or
Less Time Adjustment. See page
• More or less food than the quantity listed in the charts
should be cooked following the guidelines in any
microwave cookbook.
• During the first part of sensor use, the food name
will appear on the display. Do not open the Drawer
Microwave or touch Stop/Clear during this part of the
cycle. The measurement of vapor will be interrupted. If
this occurs, an error message will appear. To continue
cooking, touch the Stop/Clear pad and cook manually.
When the sensor detects the vapor emitted from the food,
the remainder of cooking/reheating time will appear. The
Drawer Microwave may be opened when the remaining
time appears on the display. At this time, you may stir or
season food, as desired.
• Except for Popcorn, if the sensor does not detect vapor
properly when cooking other foods, ERROR will be
displayed, and the microwave will turn off.
• Check food temperature after cooking. If additional time
is needed, continue to cook manually.
• Each food has a cooking hint. Touch the Help pad when
the HELP indicator is lighted in the display.
Drawer Microwave
17.
11

Publicité

Chapitres

Table des Matières
loading

Table des Matières