Operation - Honeywell Home EW600 Serie Instructions De Service Et De Montage

Operation

Open the fast readout display loop
The display is always off as standard (sleep mode).
Press the <H> key briefly or
Current value
Display test -
everything on
0.5 sec.
Display test -
everything off
0.5 sec
Due date
Due date value
5 sec. pulsating
Level operating scheme of the standard levels
Press the <H> key or
5 sec.
5 sec.
To change the level:
the <V> key briefly
The fast readout display starts
with the current consumption
value.
After 10 repetitions, the display
automatically changes back to
sleep mode.
You can change to the level op-
erating scheme at any time. To
do so, press the < H > or < V >
key for longer than 3 seconds.
the < V > key for longer than 3 seconds.
Press the
< H > key
MU2H-0491ge23 R1020 37 EN