Section 2 General Information And Setup; Know Your Power Washer; Emissions; Remove Contents From Carton - Generac PW 4200 PSI Manuel Du Propriétaire

Section 2 General Information and Setup

Know Your Power Washer

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Read this manual
assembling and operating this unit. Save this
manual for future and immediate reference.
Replacement owner's manuals are available
at www.generac.com.

Emissions

The United States Environmental Protection
Agency (US EPA)
Resources Board (CARB), for engines/equip-
ment certified to California standards) requires
that this engine/equipment complies with
exhaust and evaporative emissions stan-
dards. Locate the emissions compliance decal
on the engine to determine applicable stan-
dards. For emissions warranty information,
please reference the included emissions war-
ranty. It is important to follow the maintenance
specifications in the manual to ensure that the
engine complies with the applicable emissions
standards for the duration of the product's life.

Remove Contents from Carton

1. Open carton completely by cutting each
corner from top to bottom.
2. Remove and verify carton contents prior to
assembly. Carton contents should contain
one each of the following:
• Main Unit
• High-pressure Hose
• Siphon Hose and Filter
• Spray Gun
• Lance
• Oil
• Parts Bag (includes):
– Owner's Manual
– Warranty
– Hose Hook Wireform
– Bag of Colored Nozzles
– 4mm Allen Wrench
– Screws
– Filter Screen
– Register your product at
ister.generac.com/
Owner's Manual for Power Washer
(000100a)
thoroughly before
(and California Air
https://reg-
General Information and Setup
3. Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722) with the unit
model and serial number for any missing
carton contents.
4. Record model, serial number, and date of
purchase on front cover of this manual.

Assembly

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Call Generac Customer Service at 1-888-
GENERAC (1-888-436-3722)
assembly issues or concerns. Please have
model and serial number available.
1. See Figure 2-1. Pull out pull pin to raise
handle and lock into place (A).
A
Figure 2-1. Attach Handle
2. See Figure 2-2. Install hose hook using
screws and Allen wrench.
3. Coil hose and hang on hook.
Figure 2-2. Install Hose Hook
4. See Figure 2-3. Insert and snap nozzles
into spaces provided in panel.
(000100a)
for any
009077
009074
3