Publicité
Les langues disponibles
Les langues disponibles
6
Plug the power cord into
an electrical outlet and
press
POWER
to turn on
the blender.
7
To start blending, select
EXTRACT
a speed or the
program on the blending
control panel. This program
will turn off automatically.
Buttons will illuminate while
in use.
NOTE:
Proceed to the blending
control panel chart on page 20 for
speed definitions.
16
NOTE:
If you need to add
additional ingredients while
blending, switch the setting to
LOW
and remove the vented
lid cap from your pitcher lid,
leaving the lid attached. Add
ingredients through the hole
in the top of the lid, followed
by the tamper if necessary.
Replace the vented lid cap, then
increase to your desired speed.
DO NOT
attempt to add items
through the vent hole when
blending hot ingredients.
CAUTION:
Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and
possible injury.
8
If the ingredients stick to
the side of the pitcher, stop
the appliance by pressing
POWER
and wait for
the blade to stop turning.
Then remove the pitcher
lid and use the tamper to
dislodge the ingredients.
When finished, replace the
lid and continue blending.
if the ingredients continue
to stick, consider adding a
little more liquid.
9
When you have reached
your desired consistency,
pause/stop the appliance
POWER
by pressing
or the
speed you selected and wait
for the blades to stop turning.
The unit will enter idle-mode.
The
POWER
button will
remain illuminated.
WARNING:
Blades are sharp. Never
insert your hands into the pitcher.
10
Press
POWER
to turn off
the unit completely.
11
Twist pitcher counterclockwise
and lift off the motor base.
Pour and enjoy!
17
Publicité
