in possible personal injury
and/or property damage.
If the sealed NutriBullet
®
cups are warm to the touch,
power off your machine
and allow the vessel to cool
for fifteen minutes or more.
Allow contents to settle
before slowly releasing the
cup from the motor base.
With the NutriBullet
cup,
®
pointed away from your face
and body, slowly unscrew the
easy-twist extractor blade
to gently release any
residual pressure.
If you need to blend for longer
than one minute, blend for
1-minute intervals.
After
each 1-minute interval, allow
the motor base to shut off
completely and wait at least
one minute before starting
the next cycle. Do not run
for more than 3 consecutive
1-minute intervals to prevent
the contents from overheating.
Allow contents to settle for 2-3
minutes after the third blending
cycle to prevent overheating
and buildup of pressure.
Sugar in fruits and
vegetables can ferment over
time, releasing gases that
cause pressure to build up in
a sealed NutriBullet
cup.
®
not store any smoothies or
blended mixtures in vessels
sealed with the easy-twist
extractor blade.
If you will
not consume your smoothie
immediately, remove the
easy-twist extractor blade
4
and cover your NutriBullet
cup with plastic wrap
before refrigerating. If
your smoothie or blended
mixture was made in the
pitcher, transfer to another
storage container before
refrigerating. Never store
any blended mixture in a
sealed cup unrefrigerated, or
for any prolonged period of
time; contents will spoil and
ferment, producing gases
that might cause eruption.
Never blend carbonated
liquids or effervescing
ingredients
(e.g., baking
soda, baking powder, yeast,
etc.). Pressure from released
gases can cause a sealed
blending container to burst,
resulting in possible injury
and/or property damage.
BLENDING WITH THE PITCHER:
Use extra caution when
blending hot liquids in
the pitcher.
Never turn the power on
while using the pitcher
without the vented lid cap
inserted and locked into the
pitcher lid, as ingredients
Do
can splash, and if hot or
warm, could potentially
cause thermal injury and/or
property damage.
Steam and splattering
ingredients can escape
through the pitcher lid,
®
potentially scalding and/or
burning the user.
hot liquids in your pitcher
without the pitcher lid and
vented lid cap locked and
attached.
allows steam and pressure
to escape, while guarding
against excess splashing.
NEVER blend hot liquids in
your NutriBullet
other sealed vessel.
When blending hot liquids,
add liquid and solid
ingredients to your pitcher
below their respective MAX
lines. Attach the pitcher
lid with the vented lid cap
inserted and locked. Press
POWER
on the
LOW
ingredients are integrated,
increase speed as needed.
If the NutriBullet
for longer than one minute,
friction from the blades can
cause ingredients to heat and
generate internal pressure
inside the vessel. If a blending
vessel becomes warm to the
touch, turn off the machine
and allow the vessel to cool
completely before carefully
opening, pointed away from
your body to avoid injury.
BL ADE SAFET Y
Never store any easy-twist
extractor blade in the
motor base unattached
to a NutriBullet
NEVER blend
exposed blade can present
a laceration hazard.
Blades are sharp! Handle
The vented lid cap
carefully. Use care when
handling any blade. To
avoid laceration injury, do
not handle or touch any
blade edge.
cups or any
®
AVOID CONTACT WITH
MOVING PARTS!
and utensils out of and away
from blades while blending
food to reduce the risk of
severe personal injury.
TO REDUCE THE RISK OF
•
PERSONAL INJURY OR
PROPERTY DAMAGE,
and begin blending
never place the easy-twist
setting. Once
extractor blade on the
motor base without the cup
properly attached. Make
sure the easy-twist extractor
blends
®
blade is securely twisted
(hand-tightened) onto the
NutriBullet
placing it on the motor
base and operating the
NutriBullet
Check to make sure the
easy-twist extractor blade
is aligned properly before
placing it on the motor
base and operating your
NutriBullet
• After blending, turn the power
button off. Wait to remove the
NutriBullet
extractor blade assembly
from the motor base until
cup. An
®
Keep hands
cup before
®
Blender Combo.
®
Blender Combo.
®
cup/easy-twist
®
5