BTI A18 WKS-1 BL Notice Originale page 25

BRAKING SYSTEM
The run-on brake engages when the trigger is released, causing the
tool to stop within seconds.
Make sure that the insertion tool comes to a complete stop before
laying it down.
In comparison with tools without a run-on brake the run-on time will be
highly reduced by braking.
CLEANING
The ventilation slots of the machine must be kept clear at all times.
MAINTENANCE
Use only BTI accessories and spare parts. Components whose
replacement has not been described, can be exchanged at the BTI
after sales service. (BTI Befestigungstechnik GmbH & Co. KG · After
Sales Service · Salt Road 51 · 74653 Ingelfi ngen · Tel 07940 / 141-
870, -872, -873 or -886 · Fax 07940 / 141-875)
If needed, an exploded view of the tool can be ordered. Please state
the ten-digit No. as well as the machine type printed on the label
and download the drawing at BTI Homepage www.bti.de > Service
> Explosionszeichnungen und Ersatzteillisten > BTI > Akku-Geräte
or order directly at BTI Befestigungstechnik GmbH & Co. KG, After
Sales Service, Salzstraße 51, 74653 Ingelfi ngen.
SYMBOLS
Please read the instructions carefully before starting
the machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on
the appliance.
Do not use the guard for cut-off operations.
Do not use force.
Use force.
Always wear goggles when using the machine.
Wear ear protectors.
Wear a suitable dust protection mask.
Wear gloves!
Always operate with two hands.
457 803 - BTI-A18WKS-1BL.indd 25 457 803 - BTI-A18WKS-1BL.indd 25
Only for grinding.
Only for cutting work.
Pay attention to permissible disc thickness.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
n
Rated speed
0
V
Voltage
Direct Current
European Conformity Mark
GUARANTEE AND GUARANTEE SERVICE
Each tool, spare part or accessory is consistently checked before
being dispatched from the manufacturing plant. If, despite this fact,
there are any defects, please send the item directly to our Client
Services Headquarters or to the nearest service repair shop of the
firm BTI.
BTI after sales service can be reached at the following contact
information: BTI Befestigungstechnik GmbH & Co. KG · After Sales
Service · Salz Straße 51 · 74653 Ingelfi ngen · Tel 07940/141 - 874
· Fax 07940 / 141-9874
The warranty period of 36 months for tools and 12 months for
batteries and chargers starts on the date of purchase which must be
verifi ed using the original receipt. During the guarantee period the
producer guarantees:
• free removal of possible defects;
• free replacement of all damaged parts;
• free professional servicing.
The requirement for this is that the problem is a material and/or
manufacturing fault. Defects or faults caused by incorrect treatment
or excessive force are not covered by the warranty. Furthermore,
only original accessory parts may be used, which BTI has expressly
identifi ed as suitable for the operation with BTI machines.
You can fi nd out the location of your nearest customer service work-
shop in the address list at the back of this document.
25 ENGLISH
22.05.2021 13:19:36 22.05.2021 13:19:36