Publicité
Les langues disponibles
Les langues disponibles
5.
TUNING THE STEERING TRIM
STEERING TRIM BUTTONS
Gently pull the trigger to allow your car to run slowly.
Meantime, tune the steering trim to allow the front
wheels to be aligned by pressing the left or right
buttons. The neutral position of the trim adjustment is
identified by a long beep.
6.
TUNING THE THROTTLE TRIM
THROTTLE TRIM BUTTONS
Throttle Trim is used to set the idle speed of the car, by
pressing the left or right buttons. The neutral position
of the trim adjustment is identified by a long beep.
7.
TO TUNE THE STEERING DUAL RATE CONTOL DIAL
STEERING D/R KNOB
The dial marked 'ST/RD' on the transmitter controls the
amount of servo travel. You should adjust this to give
maximum steering without straining the
servo. Turning the dial
clockwise gives more
travel and turning it
anti-clockwise gives less
travel.
Set the Steering Dual Rate Control Dial to minimum first.
To set the desired steering wheel level increase it again whilst
decelerating your vehicle.
8.
STEERING/THROTTLE REVERSE
STEERING REVERSE:
To reverse the direction of servo travel, please press and hold the 'ST R/N" button
for steering (CH1) or "TH R/N" for throttle (CH2) for a few seconds until you hear a
beeping sound, then release the button.
THROTTLE REVERSE:
Allows you to electronically switch the direction that the motor operates in
relation to the throttle trigger. For example, if you pull the throttle trigger to
accelerate forward but the model goes in reverse, flip the Throttle Reverse
switch to make the model accelerate forward.
FTXVantage2Manual.indd 9
FTXVantage2Manual.indd 9
RUNNING YOUR CAR
DECREASE
INCREASE
STEERING
THROTTLE TRIM
STEERING D/R
9
05/03/2021 16:50
05/03/2021 16:50
Publicité
