Sony FWD-50PX3 Mode D'emploi page 68

Sound Mode
Sound Mode Adjust.
Tips
• You can alter the "Picture Mode Adjust." settings ("Contrast", "Brightness", "Chroma ", etc.) for each "Picture Mode".
• You can adjust the "Sound Mode Adjust." settings ("Treble" and "Bass") when the "Sound Mode" is set to "Custom".
Notes
PAP
• In the " " mode, none of the options of the "Picture/Sound" settings can be selected.
• If there is no signal currently being input, none of the options of the "Picture/Sound" setting can be selected.
For PC Input
Picture Mode
22
GB
You can adjust the sound output from the speakers SS-SP50FW (not supplied) with
various "Sound Mode" settings.
"Dynamic": Select to enhance treble and bass.
"Standard": Flat setting.
"Custom": Allows you to store preferred settings.
"Treble": Adjusts to increase or decrease higher-pitched sounds.
"Bass": Adjusts to increase or decrease lower-pitched sounds.
"Balance": Adjusts to emphasize left or right speaker balance.
"Surround": Select the surround mode according to the type of picture.
"Off": No surround output.
"Hall": When desiring to give the stereo sound of movies or music programs a
greater sense of presence.
"Simul.": When desiring to give ordinary monaural programs or news telecasts
an enhanced sense of presence using simulated stereo sound.
"Reset": Resets all settings of "Sound Mode Adjust." to default settings.
"Vivid": Select for enhanced picture contrast and sharpness.
"Standard": Select for standard picture settings.
"Custom": Allows you to store preferred settings.
"Conference": Adjusts the picture quality for video conferencing under fluorescent
lights.
Tips
• To change from one "Picture Mode" option to another, you can also use PICTURE on the
remote control instead.
• You can alter the "Picture Mode" options for each input.
Note
"Conference" may not be effective depending on the environment or the video conference
system under use. In this case, adjust the picture quality, switch to other settings of "Picture
Mode", etc.
When input is switched to a PC input source, the
"Picture/Sound" settings specific to PC input are
applied.
The "Picture/Sound" settings for a PC include the
following options: