Ayce ML-CS37-36 Manuel D'utilisation page 44

WARNING! Only change the rotational direction when the product is switched off
and has come to a complete stop! Always ensure that the forward / reverse rotation
control is adjusted to the correct position depending on the intended operation!
Always push the forward / reverse rotation control as far as it will go! Do not use the
product with the control switch in an intermediate position!
NOTE: If you are using the product for the first time after changing the rotational
direction, a locking sound may be heard. This is normal and does not represent a
defect.
ON/OFF switch
1. Switch the product on by pressing the on/off switch.
2. Switch the product off by releasing the on/off switch.
LED work light
LED work light will automatically illuminate when you turn the tool ON.
WARNING! Do not look directly into LED light.
Adjusting the Torque
Align the arrow at the top of the tool with the desired setting by rotating the torque collar.
Note: A higher number will result in higher torque or twisting action.
Note: To avoid damaging screw heads, start with a low torque setting and increase until
the screw head is flush with the work piece.
SWIVEL HANDLE
The screwdriver / torch features a rotating handle to suit a range of applications. You can
operate the screwdriver of torch in either handle position.
In-line Position
1 Hold the handle locking button down.
2 Rotate the handle clockwise until it clicks into position.
86 |
87 GB GB DE GB IT