Special Safety Instructions; Noise/Vibration Information - Ayce ML-CS37-36 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like paper
clips, coins, keys, nails, screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
EXTRA SAFETY REGULATIONS CONCERNING BATTERY
WARNING! This product is equipped with a built-in battery! Do not attempt to
open the enclosure to access the battery!
tempt to charge the product with any other charger than the one supplied.
The charger and battery supplied with it are specifically designed to work together.
rge and store the product in an ambient temperature of 18 - 24°C (65 - 75°F) to
ensure the longest battery life and best performance. Do not charge or store the
product in temperatures below 0°C (32 °F) and above 40°C (104 °F).
Small leakage of liquid from the battery may occur under extreme usage or
temperature conditions. However, if the outer seal is broken and this leakage comes
into contact with your skin wash the affected area quickly with water. If the leakage
gets in your eyes flush your eyes with clean water for a minimum of 10 minutes and
seek immediate medical attention.
Never attempt to open the product housing for any reason. If the plastic housing of
the product enclosure breaks open or cracks, immediately discontinue its use and do
not recharge it.
Do not pierce the product housing with nails, strike the product housing with a
hammer, step on the product housing or otherwise subject it to strong impacts or
shocks.
Protect the product against heat. Do not place the product in direct sunlight or use or
store the product inside cars in hot weather. Doing so may cause the battery to
generate heat, explode or ignite.
Never try to charge a product that its housing is cracked or damaged in any other way.
There is a danger of electric shock or electrocution.
Only charge the product with the charger supplied.
EXTRA SAFETY REGULATIONS CONCERNING BATTERY CHARGER
rger can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use of the charger in a
safe way and understand the hazards involved. Children shall not play with the charger.
Cleaning and user maintenance shall not be made by children without supervision.
Before using the charger, read all the instructions and cautionary markings on the
charger and product.
Do not attempt to charge the product other than supplied. The charger and product
supplied with it are specifically designed to work together.
Charge the product indoors only as the charger is designed for indoor use only.
Do not charge non-rechargeable batteries.
Protect the charger against moisture and wet conditions. There is a danger of electric
shock.
Do not place any object on top of the charger as it could cause overheating. Do not
place the charger near any heat source.
Do not use an extension cord unless it is absolutely necessary. The use of an improper
extension cord could cause the risk of fire, electric shock or electrocution.
Do not use the charger if it has been subjected to a heavy knock, dropped or otherwise
damaged in any way. Have the charger checked and repaired by an authorised service
centre.
Do not disassemble the charger. Incorrect re-assembly may result in the risk of fire,
electric shock or electrocution.
Disconnect the charger from the power supply before attempting to clean it to reduce
the risk of an electric shock.

SPECIAL SAFETY INSTRUCTIONS

Hold power tool by insulated gripping surfaces, when performing an operation where
the fastener may contact hidden wiring. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric
shock.

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 60745-1 & EN 60745-2-2.
78 |
79
GB
GB
IT

Publicité

Table des Matières
loading

Table des Matières