Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wear hearing protection!
The following information:
- That the declared vibration total value has been measured in accordance with a standard
test method and may be used for comparing one tool with another;
- That the declared vibration total value may also be used in a preliminary assessment of
exposure.
Warning:
- That the vibration emission during actual use of the power tool can differ from the declared
total value depending on the ways in which the tool is used; and
- Of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time).
DESCRIPTION OF THE SYMBOLS
1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks. The
safety symbols and the explanations that accompany them must be perfectly understood.
The warnings in themselves do not remove the risks and cannot replace correct actions for
preventing accidents.
This symbol, marking a point of safety, indicates a
caution, warning or danger. Ignoring this warning can
result in an accident to yourself or others. To limit the
risks of injury, fire or electrocution, always follow the
recommendations indicated.
WARNING – To reduce the risk of injury, user must read
instruction manual.
Always wear safety goggles or safety glasses with side
shields and a full face shield when operating this product.
Indoor use only
Conform to CE safety standards.
Recycle unwanted materials instead of disposing of them.
All appliances and packaging should be sorted and
tendered at a regional recycling centre into to be
processed in an ecological manner.
By separating a marked item from household waste, you
will help reduce the volume of waste sent to incinerators
Li-ion
or land-fill and minimize any potential negative impact
on human health and the environment.
2. Product symbols
In this manual and/or on the machine the following symbols are used. These represent
important information about the product or instructions on its use.
3.6 V 1.5 Ah
Li-ion battery
LI-ION 3,6 V
1,5 Ah
180/min no
min
-1
load speed
180 RPM
Forward/reverse
function
R
L
80 |
81
GB
DE
GB
GB
IT
3.5 Nm max.
torque
3,5 Nm
With a LED work
light to illuminate
the work area
LED
Publicité
Table des Matières
