The electrical outlet must be easy to access, no moving should be necessary.
It is mandatory that the electrical system is equipped with a ground connection.
The appliance must be part of an equipotential system. The connection is done on terminal
marked with symbol which you will find near the cable clamp. The section of the equipotential
wire must be at least 10 mm
3
OVEN START UP AND USE
COMMAND PANEL DESCRIPTION
1.
Main switch ;
2.
Cooking chamber light switch ;
3.
Analogic thermometer ;
4.
Top thermostat ;
5.
Pilot light TOP ;
6.
Bottom thermostat ;
7.
Pilot light thermostat ;
2
. The equipotential symbol is showed in the following figure.
- 23 -