Installation; Equipment Hook-Up - GGMgastro PEP Notice D'utilisation

2

INSTALLATION

Installation must be executed by qualified personnel in compliance with local, national and
European regulations.
POSITIONING

EQUIPMENT HOOK-UP

The oven is not provided with
electrically, an automatic RCD must be interposed with an opening distance between
contacts of at least 3 mm. To connect the appliance electrically it is essential to proceed in
the following way:

raise the cover of the terminal block;

connect to the terminal block the power cable.
The power supply cable must be of H07-RNF type, with approved minimum cross section
as prescribed by the specific directive.
power supply cable. When connecting the appliance
- 22 -