Installing Iaqualink; Download The App; Sign Up And Log In; Configure The System - Polaris Alpha iQ Manuel Du Propriétaire

5
Installing
iAquaLink
The iAquaLink app is available for download from
the App Store or Google Play.
With iAquaLink Control, you can connect to your
robotic cleaner from anywhere, anytime to access
many functions and troubleshooting advice. App
features are dependant on model.
Before you begin installation, make sure
you have the following:
• Robotic Cleaner submerged in the pool.
• Control Box connected and plugged into a
GFCI outlet.
• Smart device (phone or tablet) with Wi-Fi
and Bluetooth enabled
• Wi-Fi router with sufficent signal strength
at the Control Box
IMPORTANT: Have your Wi-Fi network
•
password available.

Download the App

Install or update the iAquaLink app from the App
Store or Google Play.
Once the download is complete, select the
iAquaLink icon on your smart device to open the
app.

Sign Up and Log In

Click Sign Up to create a new user account. Or, if
you previously set up an iAquaLink account, click
Log In to access your systems.
Complete all required fields in the Account Set Up
page and agree to the Terms and Conditions.
™

Configure the System

1. On the My Systems page, click
upper right-hand corner to add a system.
2. Choose "Robotic Cleaner" from the list and
choose your model type.
3. On the Control Box, press
Bluetooth light indicates status:
BLINKING - searching for signal
SOLID - paired with phone
4. Follow on-screen prompts to add your
cleaner and connect to your home router.
Wi-Fi light indicates status:
BLINKING - conected to router
SOLID - connected to the internet
NOTE: The searching screen may take a few minutes to
find your router. If you receive an error you may
have a weak router signal at the location of your
control box OR you may have entered an incorrect
Wi-Fi password. In the case of a weak router signal,
consider installing a Wi-Fi extender to boost your
signal strength. (See iAquaLink Troubleshooting
section.)
Page 13
+
in the