RealFlame 4099 Guide De L'usager page 7

OPERATION AND FEATURES
Digital Display
Timer Function
This icon will light up
with a blue light when
using the Timed Shut-
OFF function. A time will
be displayed on the main
display ranging from 10
(minutes) to 9H (hours).
Flame Brightness
When adjusting the
brightness of the flames
this icon will light up with
a blue light. The setting
will be displayed on the
main display with 1 being
the lowest setting and 5
being the highest.
!
NOTE
This firebox is equipped with power saving programs. In order for the remote to
become active, the power must first be turned ON manually by using the Control Panel. If the
power is turned OFF manually with the Unit Control Panel or with the automatic timer mode, the
remote cannot be used to turn the firebox ON. If the remote does not seem to function, turn the
unit ON using the control panel to engage the remote.
!
NOTE
When turned OFF the embers of the log set will not immediately go out. This is a
designed feature to represent the embers of the fire slowly fading out.
!
NOTE
Although the heater has been turned off the fan may still run to prevent over heating.
Main Display
All numerical information
will be displayed on this
screen along with the
related function icon.
Thermostat
°F or °C will be
displayed along with
the temperature on
˚F
the main display. The
firebox can be used
˚C without the heater if
desired, simply cycle
through the function
until no temperature
is displayed. For
instruction on
switching between °F
and °C please refer to
page 8.
7