essentiel b EVPT 40 Notice D'utilisation page 28

Tilt angle
If you want to cancel the timer, press the
•
panel or turn the unit off by pressing the on/off button
You can adjust the air flow vertically at an angle of about 30° by manually tilting the fan head forwards
or backwards.
"Memory" function
Your fan has a "memory" function: when you turn the fan back on, the previous settings (except the
timer) are saved if the unit is turned off with the remote control.
For example: You have selected the " natural" mode with the oscillation.
You switch off the appliance by pressing the on/off button
run in "natural" mode with oscillation.
N
: If you disconnect the fan from the power point, no settings will be saved.
ote
cleaning
Unplug the fan from the socket before cleaning or
•
dismantling the guards.
You can remove the front guard to access the blades to clean them. Refer to the "Assembling the
•
blades and guards" section and dismantle them in reverse order.
Remove dust periodically with a soft, dry cloth.
•
You can clean the unit's body with a soft cloth slightly moistened with water and a little mild detergent
•
(such as washing-up liquid). Wipe and then dry the unit thoroughly with a soft, clean cloth.
Make sure that water cannot come into contact with the motor.
•
Do not plug the unit back in until it is completely dry.
•
Do not use alcohol or solvents to clean it.
•
28
V.5.0
use
button until no more time is displayed on the control
.
. When you turn the fan on again, it will