essentiel b EVPT 40 Notice D'utilisation page 26

Selecting the speed (only with "natural" mode)
Press the button on the remote control or
Low speed:
•
Medium speed:
•
High speed:
•
The indicator lamp for the selected speed will light up on the control panel.
Selecting the mode
Press the button on the remote control or
Normal: The indicator lamp for "normal"
•
low, medium or high speed with this mode.
Natural: the fan speed randomly changes to reproduce the effect of a breeze. The indicator lamp for
•
"natural" mode
Night: the fan speed changes randomly and gradually decreases. The indicator lamp for "night" mode
•
will light up on the control panel.
NOTE: If you press the
•
ventilation" function (refer to the following section).
"Gentle ventilation" function
You can select the "gentle ventilation" function by pressing four times on the
•
control panel or by pressing directly on the
on the control panel lights up when the function is activated.
By activating this function, the fan blades turn at a slower speed, and the fan is quieter.
•
Press the
•
on the control panel to select another mode.
26
V.5.0
use
will light up on the control panel.
button on the control panel four times, you will activate the "gentle
button on the remote control again to deactivate the function or press the
on the control panel to select a fan speed:
on the control panel to select an operating mode:
mode will light up on the control panel. You can choose
button on the remote control. The indicator lamp
button on the
button