essentiel b EVPT 40 Notice D'utilisation page 23

assembly
IMPORTANT: Completely assemble the fan before
turning it on.
Assembling the base and body of the unit
Unscrew the lever screw (15) from the outer tube (13) (see
1.
Insert the outer tube (13) into the base (14) taking care to line up the notches, and then tighten the lever
2.
screw under the base (see
Turn the ring (12) anticlockwise to loosen it and lift the inner tube (11) to adjust the height of the fan
3.
3
(see below).
figure
To attach the fan head to the inner tube (11), first remove the screw (10). Place the head on the inner
4.
tube and tighten the screw (10) (see
WARNING: make sure that the height adjustment knob (10) is properly tightened when assembling the
fan head to the inner tube.
Ring
2
).
figure
4
).
figure
2) Adjust the
height of the
inner tube
1) Loosen
1
).
figure
Outer tube
Base
Screw with lever
Screw
Inner
tube
Height
adjustment
knob
V.5.0
assembly
23