Allen + Roth WSLVCKJ Mode D'emploi page 5

ASSEMBLY INSTRUCTIONS
7. Set assembly upright. Insert shelf pins (EE)
level where desired in tower, then rest adjustable
shelves (F) on top.
Note: Ensure the shelf pins (EE) are level.
Hardware Used
EE
Shelf Pin
8. Install small cam bolts (NN) into drawer front (L).
Set aside. Install small wood dowels (OO) into drawer
back panel (O), then attach drawer left panel (M) and
drawer right panel (N) to drawer back panel (O) with
M4 x 25 mm screws (QQ).
Hardware Used
NN
Small Cam Bolt
OO Small Wood Dowel
QQ
M4 x 25 mm Screw
9. Insert drawer bottom panel (P) into drawer left
panel (M), drawer right panel (N) and drawer back
panel (O).
7
F
EE
EE
x 8
F F
EE
8
L
x 4 OO
N
x 4
O
x 4
QQ
9
P
N
O
Lowes.com/allenandroth
8
ASSEMBLY INSTRUCTIONS
10. Insert small wood dowels (OO) into drawer left
panel (M) and drawer right panel (N). Attach drawer
front (L), securing with small cam locks (MM).
Hardware Used
MM
Small Cam Lock
OO Small Wood Dowel
11. Attach the previously removed slide runners to
drawer left panel (M) and drawer right panel (N) with
M3.5 x 12 mm wood screws (FF). Then, remove
NN
preassembled bolt from handle (LL). Insert drawer
handle (LL) into drawer front (L), securing with
previously removed bolt.
Hardware Used
M
FF M3.5 x 12 mm Wood Screw
LL
Handle
12. Insert the drawer into the assembly by pressing
down the release levers on the slide runners and sliding
the drawer into the tracks of self closing slides (Q).
M
10
L
OO
x 4
P
MM
x 4
N
O
11
Q
N
LL
M
FF
L
x 6
FF
x 1
FF
Q
12
Lowes.com/allenandroth
9
M