Klarfit Pacemaker X3 Mode D'emploi page 27

Change the programme before switching to manual mode
• Press the mode button once. The display shows 30 minutes.
• Select the desired programme time.
• Then press the start button. The display counts down and a triple beep
sounds. The belt starts at the lowest speed (0.8 km/h).
• Select the desired speed.
• The display counts down the time entered.
Change the distance before switching to manual mode
• Press the mode button twice (the display shows 1 km).
• Increase or decrease the distance with the arrow keys on the control
panel.
• Then press the start button. The display counts down and a triple beep
sounds. The belt starts at the lowest speed (0.8 km/h).
• Select the desired speed. The display counts down the distance entered.
Using the 12 automatic programmes (P01-P12)
• Select the programme key until your desired programme is displayed. The
preset time of 30 minutes is displayed.
• Increase or decrease the time with the arrow keys on the control panel
(5-60 minutes).
• Then press the start button. The automatic programme starts after a
3-second countdown.
EN
27