Klarfit Pacemaker X3 Mode D'emploi page 23

ASSEMBLY
Place the unit on its edge. Stand
behind the unit, hold it firmly and
use your left hand to pull the
locking pin out of the left side of
the base section. This holds the
unit together when folded. Use
both hands to open the unit.
Tighten the fixing screw on
the front left side to secure the
treadmill.
Guide the control panel to the
corresponding hole and fix it with
an M6 screw.
Now attach the handrails to the frame and fasten them with the Allen key.
Make the connection of the contacts on the right frame bar. Then put on the
plastic cover.
EN
23