Sunny SF-E3890 Mode D'emploi page 14

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 3:
Remove pre-assembled 2 Hex
Screws
Washers (No. 17), 2 Flat Washers
(No. 25) and 2 Wave Washers
(No. 40) from the Long Axle (No.
27).
Insert the Long Axle (No. 27) into
the Handlebar Post (No. 2), then
insert 2 Wave Washers (No. 40) to
the Long Axle (No. 27). Attach the
2 Swing Bars (No. 6L/R) to both
sides of the Long Axle (No. 27)
using 2 Flat Washers (No. 25), 2
Spring Washers (No. 17) and 2
Hex Screws (No. 24) that were
removed. Tighten and secure with
Spanner (No. 91) and Spanner
(No. 93).
NOTE: Do not completely tighten
the bolts yet.
13
(No. 24), 2 Spring