CoComm F910 Guide Rapide page 36

Wi-Fi connection
To enable Wi-Fi network adapter, slide down system information bar to display system
menu, and press on the
range of the device, it will automatically connect, and the
system notification bar.
Set up a Wi-Fi network connection
1. Hold down the
through the system settings menu by pressing on the
menu.
2. Within Networks & Internet configuration menu, you can enable or disable Wi-
Fi function. Also you can access Wi-Fi settings pressing Wi-Fi, if the Wi-Fi network
adapter is active, all networks within the device's range will be displayed.
3. Press on the Wi-Fi network you want to connect, enter the password in the pop-up
window, and press on Connect to save settings and connect to the network.
4. Within the Wi-Fi setup menu, press Wi-Fi Preferences to open Wi-Fi options menu.
Activate Wi-Fi hotspot
1. Press icon in the application menu. Within Networks & Internet select
Hotspot & tethering option.
2. Then press Wi-Fi Hotspot and press on On/Off to enable or disable the fuction
respectively
3. Within this menu you also can modify Hotspot name, Security or Hotspot password.
36 | (EN) Quick guide
icon. If any Wi-Fi network previously configured is within the
icon in the system menu to access Wi-Fi settings, or access
icon will be displayed in the
icon in the applications