Leister LHS 15 Instructions D'utilisation page 29

Error
Display Description
Err 01
Device temperature too high
Err 02 Heating element temperature too high
Err 03
Temperature probe
Err 04
Err 05
Contact your Leister Service Centres
Err 06
Err 07
Training
Leister Technologies AG and its authorised service points provide free courses in the area of applications.
3D drawings
3D drawings of the LHS air heaters line are available from your service point or at www.leister.com
Accessories
• Only Leister accessories may be used.
• Leister offers a wide range of accessories, e.g.
– Temperature controls
– Nozzles
– Blowers
• Accessories at www.leister.com
Service and repairs
• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and reliable
repair service within reasonable period, using original spare parts in accordance with the circuit diagrams
and spare parts lists.
Warranty
• For this tool, the guarantee or warranty rights granted by the relevant distributor/seller shall apply. In case of
guarantee or warranty claims any manufacturing or workmanship defects will either be repaired or replaced
by the distributor at its discretion. Warranty or guarantee rights have to be verified by an invoice or a delivery
document. Heating elements shall be excluded from warranty or guarantee.
• Additional guarantee or warranty claims shall be excluded, subject to mandatory provisions of law.
• Warranty or guarantee shall not apply to defects caused by normal wear and tear, overload or improper
handling.
• Warranty or guarantee claims will be rejected for tools that have been altered or changed by the purchaser.
Fault correction
Check environment temperature
Check air intake temperature
Check air supply volume
Check probe connection
29