CountyLine 579791 Mode D'emploi page 10

STEP 5:
Confirm stands are locked in deployed position. Deploy rear stand first. Carefully lower the beam (3) onto the tongue
(1). Slide beam forward and lock. Lock the beam into position using lock pin (2). Store second lock pin in hitch near
pivot.
M8442
STEP 6:
Route hose through ring on beam. Connect the end of the 1/2" ID x 55" hydraulic pressure hose (1) coming from the
fitting on the pump to the fitting on the valve. See illustrations below.
STEP 7:
Slide one worm gear clamp (2) on the end of the 3/4" x 71" hydraulic return hose (3) that comes from the fitting on the
filter. Then connect the hose to the fitting on the valve. Tighten worm gear clamp. See illustrations below.
ITEM DESCRIPTION
1 PRESSURE HOSE,
2 WORM GEAR CLAMP
3 3/4 RETURN HOSE
ITEM DESCRIPTION
1 TONGUE BODY
2 5/16 X 3-1/2" -SQUARE LOCK PIN
3 CYLINDER LINK
QTY.
1
1
1
Page 7
QTY.
1
2
1
M8441