Bestron A1800S Mode D'emploi page 32

Use
Figure 2
1.
Figure 3
2.
3.
Figure 4
30 EN v 090715-06
Fitting the hose to the connector
Rotate the hose connector into the hose opening on the motor unit to the right
(see Figure 2). To remove the hose, rotate the connector to the left and pull the
connector from the hose opening.
A
Adjusting the length of the telescopic tubes
Slide the telescopic tubes onto the hose handle, see Figure 3A.
Press the button on the telescopic tubes and keep it pressed in; you can then
extend or retract the tubes to the required length. See Figure 3B.
Soft and hard surfaces
User's instructions, Turbine vacuum cleaner
B
A1800S