Publicité
Les langues disponibles
Les langues disponibles
Excessive noise:
• The pump is sucking air;
• Water inlet filter is clogged;
No detergent suction:
• The spray nozzle is not set to the minimum pressure;
• Detergent injector is clogged;
• The tank, suction hose and filter are clogged;
The warranty of this equipment is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty covers
any manufacturing defect in material or operation, as well
as parts and work needed for their recovery.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by the use of it.
• Check that there are air inlets to the pump or suction
pipes.
• Check water supply tap and hose and the water inlet
filter;
• Set spray nozzle to minimum pressure;
• Call technical assistance;
• Clean the tank, suction hose and filter;
We hereby declare, under our sole responsibility, that the
product labelled
HIGH-PRESSURE WASHER WR2 130B
code VIML130WR2 complies with the following standards
or normative documents: EN 60335-2-79, EN 60335-
1:2012+A11:2014+A13:2017,
50366:2003+A1:2006, EN 55014-1:2017, EN 55014-2:2015,
EN 61000-3-2:2014, EN
61000-3-3:2013,
2006/42/EC - The Machinery Directive
2014/30/EU - The Electromagnetic Compatibility Directive
2011/65/EU – RoHS Directive
S. João de Ver,
13 December 2018
Central Lobão S. A.
Technical supervisor
Hugo Santos
with
EN
62233:2008,
EN
as defined by:
Publicité
