Bruder Mannesmann Werkzeuge 17200 Instructions De Service page 9

Selecting units and required values
You may set the required pressure unit (bar, PSI, kPa) and the required pressure in the display (4).
.
Switch the display on by pressing the (9) button.
•
Cycle through to the required unit by repeatedly pressing the (9) button.
•
Once the unit stops flashing, "0.00" will appear in the display.
•
Set the pressure to the required value by pressing the + and – buttons (10).
•
Inflating vehicle tyres
Screw the pressure hose (2) onto the tyre valve to inflate a vehicle tyre.
•
Switch the pump on using the power switch (5); the pressure gauge (11) will show the current pressure.
•
The value on the pressure gauge (11) will continuously rise during operation.
•
The pump will switch off automatically once you have reached the required value you previously set.
•
The pressure gauge has not been calibrated and cannot display a guaranteed pressure value. For safety
•
reasons, check the tyre pressure using a calibrated gauge before you drive off.
Inflating bicycle tyres
Screw the appropriate adapter (14) onto a Presta or Dunlop/Woods valve before inflating the bike tyre.
•
After that, screw the pressure hose (2) onto the adapter.
•
You may connect the pressure hose (2) directly to a Schrader valve before inflating the corresponding bike
•
tyre.
Inflating other objects
Use the ball- (15) or airbed adapter (16) on inflatable toys or sports or beach articles.
•
Screw the appropriate adapter into the air outlet (1) of the pressure hose (2).
•
Cleaning
Keep the air inlet on the device clean to keep the motor from overheating.
•
Regularly wipe the device housing off using a soft cloth – ideally after every time you use it.
•
Do not use cleaning fluids containing solvents as they may damage the finish.
•
2 years warranty
The warranty period for this tool starts at the date of purchase. Please provide your purchase bill as proof.
This warranty includes:
repair of operational failures
•
replacement of faulty parts
•
qualified service and installation
•
provided that the failure does not result of wrong handling.
Please do not hesitate to contact us for any further queries:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur-Service
Lempstr. 24
42859 Remscheid
phone: +49 2191/37 14 71
fax: +49 2191/38 64 77
email: service@br-mannesmann.de
GB - 9