Preparing For Use; Inserting / Replacing The Batteries - SilverCrest STK 36 B2 Instructions De Montage, D'utilisation Et Consignes De Sécurité

Preparing for use

For first time use, please remove the protective foil
name plate
the recess on the transmitter.
Replace the protective foil

Inserting / replacing the batteries

Insert the batteries to provide power to the product before prepar-
ing it for use.
CAUTION! Use the above-indicated battery types only. Failure to
observe this advice may result in damage to the product.
Receiver:
Remove the battery compartment cover
Remove the used batteries, if present.
Insert 2 batteries (1.5 V
Note: Ensure correct polarity. This is indicated in the battery
compartment
Close the battery compartment
Transmitter:
Remove the holder
of the transmitter and insert your name plate
13
19
(direct current), type AA).
.
9
and screw
15
on the transmitter.
from the back of the product.
10
.
9
from the back of the transmitter.
18
from the
19
into
13
GB/IE/NI 13