Kobalt 0708633 Mode D'emploi page 16

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS
CAUTION
Do not attempt to override the operation of the safety lock-out button or bail lever.
WARNING
‡ The operation of any mower can result in foreign objects being thrown into the eyes, which can cause
severe eye damage. Always wear safety glasses while operating the mower and while performing
any adjustments or repairs.
‡ Ensure that other people and pets remain at least 100 ft. away when the mower is in use.
‡ Inspect the cutting area.
‡ Remove all stones, sticks, wires, bones, and other debris that might be thrown by the rotating blades.
2. Cutting height adjustment
When shipped, the wheels on the mower are set
to a low-cutting position. Before using the mower
height best suited for your lawn. The average
lawn should be between 1-1/2 in. to 2 in. during
cool months and between 2 in. and 3-1/2 in.
during hot months.
To adjust the blade height:
To raise the blade height, grasp the height
adjustment lever ( I) and move it toward the back
of the mower.
To lower the blade height, grasp the height
adjustment lever ( I) and move it toward the front
of the mower.
3. Using the cord retainer
This lawn mower is equipped with a cord
retainer (J) in order to prevent the extension
cord from disconnecting from the power cord
while the mower is in use. The cord retainer (J)
hangs from the cord guide bar.
Note: Do not plug the extension cord into the
outlet until it has been connected to the cord
retainer (J) and plugged into the mower.
To use the cord retainer:
Fold the extension cord in order to form a tight
loop near the retainer.
Push the loop through the bottom hole in the
retainer.
Slide the loop over the retaining clip and pull
down until the cord is secured.
2
3
kobalttools.com
16
I
J

Publicité

Chapitres

Table des Matières
loading

Table des Matières