Télécharger Imprimer la page

Bestway 58482 Mode D'emploi page 7

Masquer les pouces Voir aussi pour 58482:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
Swivel head does not turn or turns
noticeably slowly.
Debris escapes from the robot.
Debris goes outside the filter cover.
Float sinks.
Robot cannot be charged / recharged.
Swivel head bottom is jammed.
Side flap is jammed.
Swivel smoothing-ring is broken.
Suction mouth's flap (on cleaner bottom)
is broken.
Draining filter plate is broken or not in
place.
Filter cover net is damaged.
Float is broken and water goes in.
Battery is damaged.
Charging cable is not completely
connected with external adaptor and
robot.
External adaptor is out of order.
Detach the swivel head and smoothening-ring in accordance
with instructions of section "How to remove the battery pack"
from the manual, then:
- Remove trapped debris
- Verify the smoothening-ring and bottom plate are installed
correctly (refer to below diagrams)
- Inspect the smoothening-ring for potential damages
and wear and tear. Replace with a new one if necessary
Check and remove any debris that hinders the movement of the flap.
Replace with a new swivel smoothing-ring.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
Suction mouth's flap works like a door to prevent the debris
from escaping from the debris compartment.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
Make sure the draining filter plate is in place and replace a new
one if necessary before next use.
Replace with a new filter cover. For assistance, please visit
the support section on our website, www.bestwaycorp.com.
Replace with a new float.
For assistance, please visit the support section on our
website, www.bestwaycorp.com.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
WARNING!
DO NOT open the robot and replace the battery by yourself. This
could result in severe or fatal injuries and the warranty will be
voided as a result.
Make sure that the charger cable is connected with external
adaptor and robot properly and completely.
Refer to instruction manual.
For assistance, please visit the support section on our website,
www.bestwaycorp.com.
WARNING!
Using the wrong external adaptor will result
in damaging the robot / battery and voiding the warranty as a result.
7

Publicité

loading