Publicité
Les langues disponibles
Les langues disponibles
-
Please read these instructions carefully before installing the device as they
contain important information concerning safety, installation, use and
maintenance.
- This manual is intended but for qualified technical staff and not for end user. It is
a task of the installer to inform afterwards user on the use of the automatism and
on possible dangers could come from it, as well as on the need of a periodical
maintenance.
- The set up is to be carried on only by qualified staff having got required technical
and professional requirements.
- The product is to be installed complying with rules in force about computer-based
closings.
- The device has been realised expressly to automate wing gates. Any other
employ is to be considered improper and therefore forbidden.
- Always use original components. The manufacturer doesn't take any
responsibilities for damages due to the use of non-original components.
- Before proceeding with set up, make sure the gate frame is solid and fitted for the
employ of the device.
- Before proceeding with set up, make sure that, during the gate move, there are
not friction points and that this one has no possibilities to unhook from the pillar.
- Before acting on the device, check the power supply voltage is disconnected.
- The equipment is not to be handled by children or incompetents.
- The reduction gear is of irreversible type and therefore doesn't need an electric
lock. The use of an electric lock is anyway advisable on wings longer than 2,5 mt
to ensure a more effective closing.
- Use the device on respecting the technical limits described in the following
manual.
- In case of lack of electric voltage, start the unblocking device to manually open or
close the gate.
- The maintenance of the device is to be executed but by qualified staff authorized
by the Manufacturer.
- Check the condition of the gate hinges any six months and lubricate them when
necessary.
- Operator has to avoid working next to hinges or any moving mechanic part able
to
cause
any danger situation.
-
A wrong installation could
the manufacturer cannot be held as responsible for.
Warnings
cause
damages to people, animals and goods, which
- 7 -
ENGLISH
Publicité
