Publicité
Les langues disponibles
Les langues disponibles
Preliminary checks
Before installing TURBO check the following points:
-
This gate automation is a self-blocking
lever tumbler
or mechanical
eliminated.
-
M
ake sure
that
the device
the
technical characteristics
-
Make sure that
the
frictions or other impediments.
-
Make sure that the device is undamaged
- For complete safety, two mechanical stops must be fitted on the floor. They
delimit the extreme points of opening and closing of the wing.
-
Perform
all the structural changes
and segregate areas in which people may be exposed to the risk of crushing,
shearing, dragging or similar dangers.
- oresee a free
F
area
-
Don't
install the device on
the presence of strong wind.
- This automatism cannot be mounted on a gate whose opening is not on a
horizontal plan.
-
For anything not expressly specified in this handbook,
ATTENTION
If the motor is installed next to a
wall or an obstacle, care this one
is not at less than 350 mm from
the motor, otherwise the
articulated arm could bump into it.
C :
Minimun
350 mm
INSTALLATION
"
stop
that block the movement of the gate must
operate
s within
table
.
gate
structure is s
turdy
in order to ensure safety distances and protect
destined to the operations of maintenance and unblocking.
blank wing gates, functioning cannot be guaranteed in
- 9 -
" automation
system
its
limits of employment
and that the
leaf move
.
follow the nor
ENGLISH
, therefore
any
lock,
be
described in
s without
ms
in
force
Fig.2
.
Publicité
