Adding A New Remote Control; Method; Method 2 Or Loss Of Remote Control; Erasing A Remote Control - Bandalux Roller Mode D'emploi

3. Adding a new remote control

A
Programmed remote control or channel

3.1 Method 1

Press «P2» from
the remote control
A
The motor responds
x1 x1

3.2 Method 2 or loss of remote control

Press «Prog.» from the motor head
(approx. 2 sec)
The motor responds

4. Erasing a remote control

Remote control or programmed
A
channel we want to keep
Press «P2» from
the remote control
A
The motor responds
x1 x1
GENERAL PROGRAMMING, RADIO BATTERY MOTORS AND C.C. INTEGRATED TRANSFORMER BANDALUX
Press «P2» from
the remote control
A
The motor responds
x1 x1
or
x1 x1
Press «P2» from
the remote control
A
The motor responds
x1 x1
B
New remote control or channel to adhere
Select the remote control
channel where we want
to copy the shade
Press simultaneously «Roll
up» and «Roll down» from the
remote control
B
The motor responds
x1 x7
Remote control or programmed
B
channel we want to delete
Select the remote
control channel where
we want to erase the
shade
Press «P2» from
the remote control
B
The motor responds
x1 x7
Press «P2» from
the remote control
B
The motor responds
x1 x5
47
EN