Bandalux Roller Mode D'emploi page 46

2. Modification of end of rail
To adjust the ends of the rail that are already programmed by Bandalux according to customer specifications
2.1 Erasing end of rail
Press «Roll up»,
until you have the
shade to the current
top rail switch.
EN
2.2 Adjustment of End of rail
Press «Roll
down», until you
have shades to the
current lower end
of rail.
46
GENERAL PROGRAMMING, RADIO BATTERY MOTORS AND C.C. INTEGRATED TRANSFORMER BANDALUX
Press simultaneously
«Roll up» and
«Roll down» from the
remote control.
The motor responds
x1 x4
6s
Press simultaneously
«Roll up» and
«Roll down» from the
remote control.
The motor responds
x1 x4
6s
Press «Roll up» or
«Roll down» until the end of
the desired top rail.
or
Press «Roll up» or
«Roll down» until the
desired lower end of rail.
or
Press «stop» from
the remote control.
The motor responds
x4 x1
4s
Press «stop» from
the remote control.
The motor responds
x4 x1
4s