Limitations For Use; Safety Instructions - Votex 525 Mode D'emploi

3. INTENDED USE
The leaf vacuum unit type 525/546 is designed for collection of brush clippings, litter,
leaves, small debris etc.
To prevent injuries, do not aspirate materials like glass, gravel, metals and other solid
or sharp objects without a fully enclosed material collection container.
Use only original VOTEX WHIRLWIND BV parts and accessories, as listed in chapter
8 of this manual. Accessories will be delivered with a separate operator's manual and
safety instructions if required.
Never use this leaf vacuum unit for any other purpose as stated in the product
description. Doing so may lead to danger.
4. VEILIGHEIDSVOORSCHRIFTEN
4.1 General instructions
Read this manual carefully before starting to use the machine. Follow all operation
guidelines and at all times respect the instructions hereunder.
Ensure that anybody other than you using this machine, knows and respects these
instructions as well. Children and anybody not capable to safely operate this machine,
should never be allowed to use it.
1. Stickers and Markings in this manual and on the machine, provide important
messages for safety. Please respect and never remove these messages.
2. Wear suitable clothing, eye and ear protection. Avoid loose garments.
3. Never approach the machine before all rotating parts have come to a complete
stop.
4. Use accessories only as designated and ensure good locking.
5. Check the machine entirely before and during each use. The machine should
only be used when all parts are properly functioning.
6. Refrain from use when damage occurs; repair first.
7. Never exceed the herein indicated maximum operating speed of the machine.
8 Ensure proper maintenance following the guidelines in this book and common
guidelines for maintenance of agricultural machines.
9 Confine the use of this machine solely to the purpose as descibed before under
limitations for use (section 3).
10. Maintenance and repair activities should only be undertaken with the machine
switched off.
4.2 Mounting the machine at front of the trailer
1. In case the unit is transported or used on a vehicle or trailer, it should be placed on
a flat surface and secured safely to prevent shifting.
2. At all times local regulations with regards to 'Vehicle rules' and 'Traffic law' -lights,
retroflectors, rounded triangle, etc.- should be respected.