Beper Master Pasta Manuel D'instructions page 16

Pasta maker Use instructions
INSTRUCTION FOR USE:
CONTROL PANEL
ON/OFF
Connecting to the power, the machine will have beep sound, and displays"----".
Pressing "ON/OFF'', displays "ON", the machine will enter standby mode.
The machine will stop working and standby if press the "ON/OFF'' during the working process.
Automatic
According to the amount of flour, press "1 cup" or "2 cups " or "3 cups" or "4 cups" .
The machine starts working with displaying countdown time.
Motor starting, driving dough device to dough for 4 minutes for 1 cup flour,3 minutes for 2 cups/3
cups/4 cups then reverse to start extruding work.
The machine will stop automatically and display "----"when finish extruding noodles, the whole pro-
cess is around 10 minutes.
Manual
After automatically function finished, if there are some dough left in the mixing bowl, please press
"Manual" function to extrude the remained dough. The countdown time for "Manual" function is 5
minutes.
Do not use this function before water and flour are mixed well.
Otherwise may cause malfunction, affecting the life of the machine.
This product can intelligent identify the hardness of mixing flour and water. It is a normal phenome-
non that the mixing axle will repeatedly reverse in the working process. If the digital display indicates
"E1" after repeatedly reversing, please check whether the flour is too dry or some foreign bodies
inside.
If no foreign bodies inside, please add proper amount of water and choose "Manual" function after
two minutes' mixing. If it still cannot work normal, we suggest to disconnect the power and clean
flours in disc and check whether it is blocked by flours or other bodies.
Please reconnect the power and continue to use, if it still display "E1", please contact the Assistance
for maintenance.
Do not add any non-liquid foreign body except flour during the working process.
(Eggs are required mixing with water.)
Do not open the top cover, unscrew the disc nut to open the fastening plate or touch the mixing axle
by hand in the working process, to avoid accident.
16