Black & Decker MC1100SD Guide D'utilisation Et D'entretien page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3.
Allow Multicooker to preheat 5 to 10 minutes.
4.
Add ingredients to the cooking pot. Cover with glass lid or leave lid off
to stir.
5.
When cooking time is done, either turn the control knob to the next
desired function (if switching functions, please see function directions),
or switch the appliance off.
6.
Unplug the appliance when not in use.
ROAST/BAKE
This function turns on the bottom and side heating elements, enabling you to
both bake and roast foods like in a conventional oven. On this setting, you will
use both the control and temperature knobs. The roasting rack can be used to
raise food above the pan bottom for more even roasting or baking.
Plug in the appliance and press power switch to On. The power light
1.
will illuminate and stay on until the appliance is switched to Off.
2.
Turn the control knob to Roast/Bake, and then turn the temperature
knob to the desired temperature.
3.
Allow the Multicooker to preheat and come to desired temperature.
This will take approximately 15 to 20 minutes.
4.
Add ingredients to the cooking pot. Cover with glass lid. For best
results, avoid opening the lid during the cooking process. If baking with
an oven safe baking pan, place the pan directly on top of the roasting
rack for more even results.
5.
When cooking time is done, either turn the control knob to the next
desired function (if switching functions, please see function directions),
or remove food and switch the appliance Off.
6.
Unplug the appliance when not in use.
8

Publicité

Table des Matières
loading

Table des Matières