Publicité
Step 9
å
Carefully stand your unit upright in its fi nal location.
å
NOTE: Do not turn the SAFETY DRYWALL ANCHOR (61M) into a wall
stud. If you prefer to fasten the SAFETY STRAP (60M) to a wall stud, go
to your local hardware store for proper hardware.
å
INSTALLATION INSTRUCTIONS:
1. Insert the SAFETY DRYWALL ANCHOR (61M) through the WASHER (13M)
and the end of the SAFETY STRAP (60M).
2. Using a Phillips screwdriver or a hand drill, press the screw slightly
onto the drywall.
3. Apply pressure; turn the screw until a pilot hole is made and the nylon
sheath slips through.
4. Turn the screw until it is fl ush against the wall and you feel a
fi rm resistance.
5. Continue to turn until the screw starts spinning freely.
å
NOTE: Before moving your unit to a diff erent location, unscrew the
SAFETY DRYWALL ANCHOR (61M) from your wall. The nylon sheath
will remain behind your wall.
www.sauder.com/services
422600
Pro Tip: Lift with your
legs. And, you know,
your arms.
13M
61M
60M
Page 13
Publicité
