Publicité
Les langues disponibles
Les langues disponibles
EN
EN
CHARGING A BATTERY PACK
The TSTAK
CONNECT RADIO + CHARGER includes a large storage compartment. This
®
compartment also stores and protects the AC/DC power adaptor when not in-use.
. 1
Open the compartment to take out the AC/DC power adaptor (see Figure 1 and Figure 3).
. 2
Plug the charger AC/DC power adaptor into an appropriate outlet and connect it to the TSTAK
CONNECT RADIO + CHARGER power-in port before inserting the battery pack.
The Mains Adaptor indicator LED will light in red.
. 3
Open the appliance cover by releasing its locking latch.
Insert the battery pack (not included) into the radio, making sure the pack is securely held in the
. 4
receptacle (Figure 4). The battery indicator LED will blink continuously, indicating that battery
charging is in process.
The AC adaptor LED lights in red. The battery LED will light in accordance with battery charging
status (Green, Yellow, Red).
Note: Close the cover and check it is tightly closed.
. 5
The charging completion will be indicated by a steady battery indicator LED. The pack is fully
charged and may be used at this time or left in the charger.
HOT/COLD PACK DELAY
When the charger detects a battery pack that is too hot or too cold, it automatically starts a Hot/Cold
Pack Delay, suspending charging until the battery pack has reached an appropriate temperature.
The charger then automatically switches to the pack charging mode. This feature ensures maximum
battery pack life.
ELECTRONIC PROTECTION SYSTEM
Li-Ion tools are designed with an Electronic Protection System that will protect the battery pack
against overloading, overheating or deep discharge. The tool will automatically turn off if the
Electronic Protection System engages. If this occurs, place the lithium-ion battery pack on the
charger until it is fully charged.
LED INDICATORS
A three-color LED indicates the battery pack status
Green
Yellow
Red
Slow Blink & Mains
Adaptor LED is on
Fast Red Blink
A red LED indicates battery Mains Adaptor
red
14
Battery LED
Battery pack is fully charged
Battery pack is partially charged
Battery pack needs to be charged
Battery is charging
Error / Faulty battery pack
Mains Adaptor LED
Mains Adaptor Connected
®
Publicité
