Publicité
Les langues disponibles
Les langues disponibles
Montageanleitung / Assembly instruction / Notice de montage
SR-EF (48V) mit TS-62 B
SR-EF (48V) with TS-62 B
SR-EF (48V) avec TS-62 B
Assembly for active leaves DIN left is described below. For active leaves DIN right, please proceed accordingly.
Attach drilling template and choose corresponding drill holes depending on mounting situation (direct mounting,
mounting with standard profile or mounting with adaptor plate). Drill holes.
Direct mounting
1a
Screw on door closer mounting plates.
Mounting with standard profile
1b
Screw on standard profiles (optional), shorten if necessary
Mounting with adaptor plate
1c
Screw on adaptor plate (optional), shorten if necessary
Direct mounting
2a
Mount active leaf slide rail and passive leaf slide rail directly.
Mounting with standard profile
2b
Mount active leaf slide rail and passive leaf slide rail onto standard profile.
Mounting with adaptor plate
2c
Mount active leaf slide rail and passive leaf slide rail onto adaptor plate.
Connect lever arms to door closer
3
Close closing speed valve
4
Open speed valves. Close doors.
Set closing speed.
5
Set closing force.
6
Set latching speed.
7
Set back check . Set delay action .
1
8
Determine dimension x in line with drawing
9
x + 28 mm and trim
Push coupling sleeves as depicted onto the connecting rod
10
connecting rod between the rod ends
screws
. Attention: the screws of the coupling sleeves have to point downwards.
4
Functional test SR:
Open both door leaves approx. 60°, active leaf must stay open. Passive leaf closes. Active leaf must only close
when the angle of the passive leaf is approx. 30°.
(DIN links / DIN rechts spiegelbildlich)
(DIN left / DIN right mirror image)
(DIN gauche / DIN droite inverser l´illustration)
. Fit door closer
1
. Guide the lever arm in the direction of the slide rail
1
2
.
2
. Push the coupling sleeves over the rod ends and tighten grub
3
.Screw on door closer mounting plates
1
.Screw on door closer mounting plates
1
.
2
. Cut connecting rod to length in line with said dimension
1
. Turn the connecting rod by 90°
1
.
2
.
2
and connect to the slide rail .
2
.Push
2
3
11/14
Publicité
