Publicité
Les langues disponibles
Les langues disponibles
Warning:
Change the LPG Gas Cylinder only in a well ventilated area, away trom any inflammation source
(candle, cigarettes, other flame producing appliances ... ).
Check that gas governor sealed and that it is in good condition.
AREA HEATER ASSEMBLY
Tools Required
Phillips head screwdriver
2 adjustable spanners
Note: Remove any transit protection material
STEP 1
Attach wheel assembly to base
with two M8X16mm bolt and nut.
STEP 2
Assemble the tank on the base
with four M8 x 16mm and eight M5X10mm bolt and nut.
STEP 3
Put the burner on the tank,
assemble the burner on the tank
with four M4X8mm bolt and nut.
STEP 4
Put the mesh guard around the burner,
the side with door should
be face with the ignite. Fix the
mesh guard in the hole on the
tank with M4 nut.
STEP 5
Assemble the handle on the same
side with wheel, use two M6 bolt
and nut.
STEP 6
Screw the butterfly nut on the
top of mesh guard.
OUTDOOR HEATER PARTS LIST
PARTS NAME
WINNING NUT
MESH GUARD
NUT
BURNER
TANK HOUSING
HOSE and REGULATOR
M5X10MM BOLT and NUT
WHEEL
M8X16 BOLT
BASE
STEEL CONNECTOR
TANK
QUANTITY
1
1
4
1
WHEEL
1
1
8
STEEL
CONNECTOR
1
4
BASE
1
1
WINNING NUT
MESH GUARD
NUT
BURNER
HANDLE
TANK HOUSING
HOSE AND
RESULATOR
M5x10mm
BOLT AND NUTS
M8x16mm
BOLT
Publicité
