Minebea Intec Option L9 Notice D'installation page 9

Timer Settings for the Scale
The timer settings for
– Automatic shutoff of display backlighting, and
– Automatic shutoff of the scale
are configured under "Setup" in the scale operating menu.
depending on the menu settings, the scale/backlighting shuts off automatically after
2, 4 or 10 minutes without use.
§ Switch off the scale.
§ Switch the scale back on; during the self-test, press the ) key. Open the "Setup"
submenu in the operating menu.
Level 1 Level 2
SETUP
utilit
When a timer setting is configured, the "weighing" symbol on the display starts flashing
when the first half of the configured period has elapsed.
Level 3 Level 4
8.
o 8.9.1
8.9.2
8.9.3
Installation Instructions | Installationsanleitung
§ Press )
§ Press k repeatedly
§ Press )
§ Press k repeatedly
§ Press ); "Automatic shutoff after
2 minutes"
§ Press ); "Automatic shutoff after
4 minutes"
§ Press ); "Automatic shutoff after
10 minutes"
§ Press ); "o" is displayed, indicating
that this item is set.
§ Press and hold ) (> 2 sec) to exit the
menu.
9