Minebea Intec Option L9 Notice D'installation page 8

Automatic Shutoff: Scale
The settings for automatic shutoff of the scale are configured under "Setup" in the scale
operating menu.
– With the "Automatic shutoff" setting, the scale is shut off after 2, 4 or 10 minutes with-
out use, depending on the timer setting.
§ Switch off the scale.
§ Switch the scale back on; during the self-test, press the ) key. Open the "Setup"
submenu in the operating menu.
Level 1 Level 2
SETUP
utilit
8
Installation Instructions | Installationsanleitung
Level 3 Level 4
8.
8.7.1 (Yes) § Press k repeatedly; "Automatic shutoff"
o 8.7.2 (No)
§ Press )
§ Press k repeatedly
§ Press )
§ Press ); "o" is displayed,
indicating that this item is set.
§ Press and hold ) (> 2 sec) to exit the
menu.