COMAC CM Mini Orbital Manuel D'utilisation Et D'entretien page 20

before continuing to use the machine (immediately contact a specialized technician).
• Do not cut the plug of the battery charger to replace it with another plug, to avoid dangerous situations.
• In case of danger, react immediately by removing the battery from the machine.
• For any maintenance operation on the machine, turn off the machine with the general switch and
remove the battery from the battery support compartment.
• During use of the machine, be careful about other persons, especially children.
• Only use accessories supplied with the machine, or those specified in the instructions manual. The
use of other accessories may compromise the safety of the machine.
• When not in use, the machine must no be kept with the battery uselessly connected to the machine.
• Do not submerge the machine in water, do not use solvents or other derivatives to clean it.
• The manufacturer is not responsible for any damage to persons, animals or objects, resulting from
the improper and unreasonable use of the machine, and from any use which is not in conformity with
the above-mentioned indications.
• For disposal or scrapping, follow the rules in vigor in the country of use.
• Before connecting the battery charger base to the electrical outlet, check that the electrical requirements
indicted on the ratings plate correspond with those of the electrical outlet. The battery charger base
must be supplied only with electrical current indicated on the ratings plate.
ATTENZIONE:
• The machine must not be used or kept outdoors, or in conditions of humidity and moisture. It should
not be exposed to rain.
• The storage temperature must be between -25°C and +55°C. And it must be stored indoors.
• Conditions of use: ambient temperature between 0°C and 40°C with a relative humidity between 30
and 95%. The machine has been developed only for dry cleaning and it should not be used or kept
outdoors in moist conditions.
• The machine does not cause harmful vibrations.
• IWhen the machine is being used in hazardous locations (for example filling stations) the relative
safety regulations must be followed. It is forbidden to use the machine in areas with a risk of explosion.
• Do not place any liquid containers on the machine.
• In case of fire, use powder extinguishers. Do not use water.
• The vibrating pad must not work when the machine is still and not moving for too long a time, in order
to prevent damage to the floor.
• Do not bump, knock or crash into racks, shelf units or scaffoldings where there is a risk of falling
objects or particles. The user must always be equipped with personal protective gear (gloves, shoes,
helmet, goggles, etc...)
• In case of functional anomly, make sure they are not caused by the lack of regular maintenance of
the machine. If they are not, contact the authorized service centre.
• In case of replacement of parts, always ask for ORIGINAL spare parts from an authorized distributor.
• Restore all electrical connections after any maintenance operation.
• Have the machine checked by an authorized service centre annually.
• Dispose of consumable materials by scrupulously following the current norms and regulations. When,
after years of precious work, your machine must be retired, provide for the appropriate disposal of the
materials composing the machine, keeping in mind that the machine has been manufactured using
entirely recyclable materials.
20