Spinlock DECKVEST VITO Mode D'emploi page 9

Contents
Pylon Light
Approval conditions
Re-arming your Deckvest
Inflating, deflating and testing your Deckvest
Maintaining your Deckvest
Instructions for use
Inspection record sheet
Spinlock Deckvest
This Deckvest is an integrated lifejacket and harness approved to ISO 12402-3 (150N) or
ISO 12402-2 (275). Minimum Buoyancy 170N or 275N.
It is important to get into the habit of wearing your Deckvest. It is comfortable, safe and
a pleasure to wear.
A lifejacket harness only works correctly if it is fitted and secured correctly.
Inflatable lifejackets only become buoyant when inflated: they contain no inherently
buoyant materials.
Practice and training are required with this device before use. As user, it is your personal
responsibility to understand the operation and maintenance requirements of your
inflatable lifejacket and be familiar with its limitation
Approval conditions:
This Deckvest is an integrated CE approved lifejacket according to ISO 12402-3 (150N) or ISO
12402-2 (275) and a CE approved Integrated Deck harness according to ISO 12401.
Re-arming a Deckvest
Follow Hammar Re-arming Instructions. Only approved Spinlock Deckware re-arming kits
should be used.
Hammar
to
ycling
WARNING:
The deck safety harness and safety line may transmit very large forces. Only
attach to strong hooking points or jack-lines.
The deck safety harness and safety line are intented to prevent the user falling
overboard. They do not provide protection from falls at height.
It is unsafe to wear this harness loose, the harness shall be worn tightly in
d
order to be effective.
3R903A_4 - Deckvest Vito Instruction Book.indd 9
- Part No: DW-RAH/V170 - 33g cylinder DW-RAH/V275 - 60g Cylinder
®
s.
Page no:
7
8
8
9
10
11-53
54
8
27/08/2019 11:26