Before Initial Use; Charging Up The Battery; Use - MAXXMEE Smoothie Maker 2 go Mode D'emploi

Masquer les pouces Voir aussi pour Smoothie Maker 2 go:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
self or to replace any individual parts.
In the event of any damage, contact
the customer service department.
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the product from working and
to avoid possible damage.

BEFORE INITIAL USE

There may still be some production
residues on the product. To avoid harmful
effects to your health, clean the product
thoroughly before using it for the fi rst
time (see the "Cleaning" chapter).
CHARGING UP THE
BATTERY
Please Note!
Only use a USB mains adapter which
corresponds to the technical data of
the product (see rating plate or "Tech-
nical Data").
Do not connect the product to a com-
puter because the computer might
be damaged by the high charging
current.
Charge up the battery fully before you
fi rst use the product so that it reaches full
capacity.
1. Connect the USB cable to a USB
mains adapter.
2. Place the magnetic connector of the
USB cable on the charging contacts
(2) on the motor unit.
3. Connect the USB mains adapter to
an easily accessible plug socket. The
operating lamp (1) fl ashes red during
the charging process.
4. When the battery is charged, the
operating lamp is lit constantly green.
First pull the USB mains adapter out
10
02757_inlay_DE-EN-FR-NL_A5_V1.indb 10
02757_inlay_DE-EN-FR-NL_A5_V1.indb 10
of the plug socket and then discon-
nect the USB cable from the product.
If the operating lamp fl ashes
red, the battery is empty and the
product needs to be charged.

USE

Please Note!
Do not leave the product unsuper-
vised during operation!
Do not switch on the motor unit with-
out any contents in the cup.
Do not pour any hot liquids into the
cup.
Do not detach the motor unit during
operation.
Only detach the motor unit from the
cup once the blade has come to a
standstill.
The product must not be transported
when it is switched on.
1. Wash the fruit or vegetables you want,
remove the cores if necessary and
chop into small pieces.
2. Pour fi nely chopped fruit and / or veg-
etables as well as water, milk or other
liquids into the cup (8). Do not exceed
the maximum fi ll level (6) (approx. 250
ml) when you do this.
3. Place the motor unit (4) on the cup and
turn it clockwise to secure it in place.
The operating lamp (1) lights up green
to indicate that the motor unit is ready
to operate.
If the motor unit is not in the cor-
rect position, the operating lamp
lights up red.
4. Hold it fi rmly with one hand and press
the On / Off switch (3) twice to switch
18.06.2020 11:53:33
18.06.2020 11:53:33

Publicité

Table des Matières

Dépannage

loading

Table des Matières