Kenmore AllergenSeal DU2055 Manuel D'entretien Et D'utilisation page 11

3. Press the switch to the "II" position for
cleaning carpets or rugs.
NOTE:
The brushroll rotates when the
vacuum cleaner is in the "II" position.
CAUTION
Do not allow the vacuum cleaner to
remain in one spot for any length of time
when the brushroll is turning. Damage
to carpet may occur.
4. Once you have completed vacuuming,
switch to the "O" position and unplug
the power cord from the power outlet.
NOTE:
Select the right mode when
using this vacuum cleaner. Do not press
the switch to the "II" position when
cleaning the bare floor, otherwise it could
potentially damage the floor.
BRUSHROLL INDICATOR LIGHT
Light Color Status
The brushroll is spinning
Green, Continuous
and working as it should.
There is a jam in the
brushroll area. Turn off and
Red, Continuous unplug the vacuum, and
remove any blockages in
the nozzle.
No Light The brushroll is off.
Brushroll
Indicator Light
OPERATION MODES
ABOVE FLOOR MODE
1. Place the vacuum cleaner in the upright
2. Pull up to release the flexible hose for
3. Choose the desired extension wand/
4. Turn on the vacuum cleaner by pressing
5. Once you have completed vacuuming,
- 11 -
locked position.
above floor cleaning.
Ⅲ
attachments and insert it into the flexible
hose.
the switch to the "I" position.
switch to the "O" position and unplug
the power cord from the power outlet.
Ⅱ
Ⅰ
Upholstery
Tool
Extension
Wand
3-in-1
Combination
Tool