Disposal; Technical Data - Lux Tools HD-170/2500 Notice Originale

Hochdruckreiniger_345707.book Seite 28 Freitag, 25. November 2016 2:54 14
GB
Fault/malfunction
Great pressure variations.
Machine is leaking.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.

Disposal

Disposal of the appliance
Appliances which are labelled with the adja-
cent symbol must not be disposed of in
household waste. You must dispose of such
old electrical and electronic equipment sep-
arately.
– Please check with your local authority about the
possibilities for correct disposal.
Through separate disposal you send old equipment
for recycling or for other forms of re-use. You will
thus help to avoid in some cases that damaging
material gets into the environment.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for
recycling.

Technical data

Item number
Mains voltage
Power consumption
Protection class
Grade of protection
Acoustic pressure (L )*
PA
Guaranteed acoustic power
(L )*
WA
Total weight
Max. inlet temperature (water
connection)
Min. supply quantity
Max. inlet pressure
Operating pressure
Max. permissible pressure
Max. Flow rate, water
Recoil force of hand-held spray
gun
Vibration**
Mains impedance Z ***
max
28
Cause
Leaks?
Setting of the high-pressure jet noz-
zle?
High-pressure jet nozzle clogged? ► Clean the high-pressure jet noz-
Water inlet too low?
Pump defective?
*) The specified values are emission values and do not necessar-
ily represent safe workplace values. Although there is a corre-
lation between emission and immission levels, this cannot be
used to infer whether additional safety measures are necessary
or not. Factors which affect the current immission levels at the
workplace, include the type of room, other sources of noise,
e. g. the number of machines operating and other processes
taking place in the vicinity. Permitted workplace values can dif-
fer from country to country. This information is designed to help
the user to better assess the dangers and risks. Determination
of noise emission values in accordance with EN 60745-1.
**) The specified vibration emission value was measured in
accordance with a normed test procedure and can be used in
order to compare one tool with another. The specified vibration
emission value can also be used for an introductory evaluation
of the exposure. The vibration emission value may fluctuate
from the specified value during actual use of the power tool.
These fluctuations will depend on the way in which the power
tool is used. Try to keep vibrations to a minimum. One method
of reducing the vibration load is, for example, limiting the length
of time you work with the tool. All parts of the operating cycle
must be taken into account for this purpose (for example, also
including times in which the power tool is switched off and
times in which it is switched on, but is running without load).
Determination of vibration emission values in accordance with
EN 60745-1.
***) Special connection conditions according to EN 61000-3-11:
Only connect the device to a power supply with an impedance
less than or equal to Z
company if necessary.
345 707
230 V~, 50 Hz
2500 W
I
IPX5
75 dB(A)
(K = 3 dB(A))
95 dB(A)
26 kg
40 °C
6,7 l/min
0,6 MPa
13,5 MPa
17 MPa
7,8 l/min
18,35 N
< 2,5 m/s²
(K = 1,5 m/s²)
0,299 Ω
Remedy
Check all inlet pipes leading to the
pump for leaks or clogs.
Check the setting on the hand-held
spray gun.
zle – p. 27
Check the water inlet volume.
Contact your local vendor.
. Contact your electricity supplying
max
Note: The product is intended for use only
in properties having a mains current carry-
ing capacity of ≥100 A per phase and being
supplied by a distribution network with a
mains voltage of 230 V. If required, contact
the electricity company to ensure that the
mains current carrying capacity at the con-
nection point to the public power grid is
adequate for connecting the product.