EN Safety
PL Bezpieczeństwo
EN
Troubleshooting
Fault
The appliance does not work.
Fan turns on and off during cooking.
After cooking has completed, a fan is
still operating.
The appliance does not work.
appears in the display panel.
The microwave does not switch on.
It takes longer than before for the food
to heat up in the microwave.
The food is not sufficiently cooked in
the time given by the recipe.
Uneven browning.
The lamp does not turn on.
A particular operating mode or power
level cannot be set.
FR Sécurité
RO Siguranță
Possible cause
Faulty fuse or RCD has tripped.
Power cut.
This is normal as the oven maintains the cooking temperature.
The cooling fan is operating and will switch off automatically when the oven
drops below 75°C.
Child Lock is active.
Door not fully closed.
The selected microwave power level is
too low.
A larger amount than usual has been
placed in the appliance.
The food was colder than usual.
An incorrect setting or different
quantities were used.
The temperature setting is too high, or
the wrong shelf level was used.
The lamp is broken.
The temperature, power level or
combined setting is not possible for
this operating mode.
The thermal safety switch-off function
has been activated.
The thermal safety switch-off function
has been activated.
Rapid heating has failed.
Solution
Replace fuse or reset the RCD at the
main consumer unit.
Check whether the kitchen light or
other kitchen appliances are working.
Deactivate Child Lock as shown in the
instruction manual.
Check whether food residue or debris
is trapped in the door.
Select a higher power level.
Double the amount = almost double
the cooking time.
Stir or turn the food during cooking.
Double check the temperatures. The
ingredient quantities are different to
the recipe. Double check the recipe.
Modify the browning times if
necessary to suit personal tastes.
Replace the lamp.
Choose permitted settings.
Call Customer Services.
Call Customer Services.
Call Customer Services.
14